Marshall Metal Roofing — Residential & Commercial

Marshall TX Roof Pros provides professional metal roofing in Marshall, TX for residential and commercial properties across Harrison County and the Big Cypress basin. Metal moves. A long panel is a measurably different length on a January morning than on a July afternoon, and every detail on the roof either allows for that or slowly tears itself apart. Where those panels meet an old brick wall, the wall usually loses.

That is the detail we get called about most. A standing seam run into a masonry sidewall needs a receiver let into a bed joint and a flashing leg that can slide inside it, not a Z-closure screwed flat to the brick face and caulked. Face-fixed metal on soft brick works its anchors loose and brings crumbs of the face with it, and then you have a leak and a masonry repair rather than a roof adjustment.

For panel choice we are plain about the trade. Standing seam with concealed clips has no exposed penetrations and outlasts anything else we install, and it costs accordingly. Exposed-fastener R-panel is a genuinely good value on shops, barns, carports and outbuildings, and it comes with a maintenance obligation, because the neoprene washers under those screws are the wear part and want checking around the ten year mark.

Substrate matters more here than the finish does. Galvalume gives better corrosion life than plain galvanized, and a Kynar-based coating holds color far longer than a polyester one on the south and west planes that take our afternoon sun. On an unconditioned barn we will happily leave you with bare Galvalume and put the savings somewhere useful.

Metal over an existing shingle roof is a common request and our answer depends on the deck. Over a sound plywood deck with purlins or a proper underlayment separator, it is reasonable. Over the one-by plank decks under a lot of the older Marshall houses, we would rather tear off, because you cannot inspect what you are covering and plank movement telegraphs into a panel roof in a way it never does under shingle.

Noise and lightning come up on every metal quote, so here is the honest answer. Solid decking and attic insulation reduce rain noise to something most people stop noticing within a month, and a metal roof does not attract lightning. What it genuinely does is shed a fifty-inch rain year faster than anything else and last long enough that the chimney will need work first.

Our licensed and insured team brings the right materials and equipment to every job — pointing mortar batched to ASTM C270 Type O at 350 psi, counterflashing let into a raked bed joint and pinned with lead wedges, hand-chiseled joint preparation in place of a cut-off wheel, a chimney cricket framed to shed water clear of the flue, cast concrete chimney crown with a drip overhang past the brick face, vapor-permeable pointing that lets a brick wall dry outward — and backs the work with a written workmanship warranty. We serve Marshall and nearby communities including Longview, Hallsville, Waskom, Scottsville.

What We Handle

Why Marshall Chooses Marshall TX Roof Pros

• ✓We survey every roof-to-brick termination with a probe before quoting, and you get those photographs whether or not the job is ours, because the joint depth is the number that decides the scope.
• ✓Pointing mortar is specified by ASTM C270 type and chosen to be weaker than the brick around it, so the joint stays the part that wears rather than the face of the wall.
• ✓Joint preparation is done with hand chisels wherever the joints are thin. A cut-off wheel is faster and it breaks brick edges and overcuts the vertical joints, which you then live with forever.
• ✓We turn down elastomeric coating work on masonry, every time it is asked for, and explain what trapping moisture behind a brick face actually does to the wall over a wet winter.

The standards behind metal roofing

Quality here is not a matter of opinion — it is written down. The metal roofing work we do in Marshall follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.

Every metal roofing project in Marshall gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.

Ready to get started? Call (844) 511-2320 for a free metal roofing free estimate in Marshall, or request a quote and we'll get right back to you.

Related Services

• Roof Replacement
• Roof Leak Repair
• Storm Damage Restoration
• Hail Damage Roofing